Workplace Group Occupational Health and Safety Services
W. Jon Wallace Bio

Contact

Most Cited OSHA Standards for 2004

Safety services
Software
Training
Other articles
Download printable PDF of this article

Listed below is a summary of the top 10 OSHA cited standards by federal OSHA for fiscal year 2004.

1

Scaffolding: 1926.451

Total Violations: 8,682

Top 5 sections cited

1926.451 (g)(1 ) —  Lack of fall protection: 1,409

1926.451 (e)(1 ) —  Failure to provide proper access: 1,152

1926.451 (b)(1) — Inadequate platform construction: 1,031

1926.451 (g)(1)(vii) — Lack of personal fall arrest or guardrail systems: 551

1926.451 (c)(2) —  Failure to properly support scaffolding: 545

2

Hazard Communication: 1910.1200

Total Violations: 7,318

Top 5 sections cited

1910.1200 (e)(1) —  Failure to develop a written program: 2,319

1910.1200 (h)(1) —  Failure to train employees: 1,044

1910.1200 (h) — [per 1926.59] Hazard Communication for construction: 768

1910.1200 (g)(1) —  Failure to have an MSDS for each hazardous chemical: 707

1910.1200 (f)(5)(i) —  Failure to properly label each container of hazardous chemicals: 590

3

Fall Protection: 1926.501

Total Violations: 5,680

Top 5 sections cited:

1926.501 (b)(1) —  Failure to provide fall protection: 1,949

1926.501 (b)(13) —  Lack of fall protection during residential construction: 1,534

1926.501 (b)(10) —  Failure to provide fall protection on low-slope roofs: 581

1926.501 (b)(11) —  Failure to provide fall protection on steep roofs: 324

1926.501 (b)(4)(i) —  Failure to guard floor holes: 256

4

Lockout/Tagout: 1910.147

Total Violations: 4,304

Top 5 sections cited:

1910.147 (c)(1) — Lack of a written program: 817

1910.147 (c)(4)(i) — Failure to develop equipment-specific lockout procedures: 752

1910.147 (c)(7)(i) — Failure to train employees: 603

1910.147 (c)(6)(i) — Failure to conduct annual periodic inspections: 538

1910.147 (c)(4)(ii) —  Inadequate equipment-specific procedures: 313
5

Respiratory Protection: 1910.134

Total Violations: 4,302

Top 5 sections cited:

1910.134 (c)(1) — Lack of a written program: 696

1910.134 (e)(1) — Failure to perform medical evaluations: 627

1910.134 (c)(2)(i) — Failure to provide Appendix D when respirator use is voluntary: 375

1910.134 (f)(2) —  Failure to perform initial and annual fit testing: 319

1910.134 (d)(1)(iii) —  Failure to identify and evaluate workplace respiratory hazards: 211

6 Electrical – Wiring: 1910.305

Total Violations: 3,337

Top 5 sections cited:

1910.305 (b)(1) —  Failure to protect conductors entering boxes, cabinets, or fittings: 741

1910.305 (b)(2) —  Lack of covers for pull boxes, junction boxes, and fittings: 607

1910.305 (g)(2)(iii) —  Lack of strain relief for flexible cords: 449

1910.305 (g)(1)(iii) —  Using flexible cords in a prohibited situation: 429

1910.305 (g)(1)(iii)(A) —  Using flexible cords in lieu of permanent wiring: 183

7

Machine Guarding – General Requirements: 1910.212

Total Violations: 3,245

Top 5 sections cited:

1910.212 (a)(1) —  Failure to guard machinery: 1,841

1910.212 (a)(3)(ii) —  Failure to guard point-of-operation: 958

1910.212 (b)  —  Failure to anchor fixed machinery: 178

1910.212 (a)(5) —  Failure to guard exposed fan blades: 171

1910.212 (a)(2) —  Failure to permanently affix guards: 63

8

Powered Industrial Trucks: 1910.178

Total Violations: 3,130

Top 5 sections cited:

1910.178 (l)(1)(i) —  Failure to ensure operator competency: 569

1910.178 (l)(6) —  Lack of operator certification: 431

1910.178 (p)(1) —  Failure to remove unsafe trucks from operation: 347

1910.178 (q)(7) —  Failure to inspect trucks: 243

1910.178 (l)(4)(iii) —  Failure to evaluate operator performance every 3 years: 223

9

Electrical Systems: 1910.303

Total Violations: 2,399

Top 5 sections cited:

1910.303 (b)(2) —  Failure to use electrical equipment as listed for use: 483

1910.303 (g)(2)(i) —  Failure to guard energized electrical conductors ≥ 50 volts: 460

1910.303 (f)  —  Failure to identify disconnecting means and circuits: 432

1910.303 (g)(1)(ii) —  Failure to keep work spaces clear: 238

1910.303 (b)(1) —  Use of electrical equipment containing recognized hazards: 219
10

Mechanical power-transmission apparatus: 1910.219

Total Violations: 2,321

Top 5 sections cited:

1910.219 (d)(1) —  Failure to guard pulleys: 641

1910.219 (e)(3)(i) —  Failure to guard vertical and inclined belts: 415

1910.219 (f)(3) —  Failure to enclose sprockets and chains: 341

1910.219 (e)(1)(i) —  Failure to guard horizontal belts and ropes: 266

1910.219 (c)(2)(i) —  Failure to guard horizontal shafting: 171

 

Top 10 Willful Violations for 2004:

Standard Total Violations
(1)
1926.652 – Protective Systems: Excavations 69
(2)
1926.451 – Scaffolding 59
(3)
1926.501 – Fall Protection 48
(4)
1910.147 – Lockout/Tagout 25
(5)
1910.146 – Permit Required Confined Spaces 22
(6)
1926.760 – Fall Protection: Steel Erection 21
(7)
1910.95 – Noise Exposure 20
(8)
1926.651 – Excavations 19
1926.1101 – Asbestos 19
(9)
1910.134 – Respiratory Protection 16
1910.212 – Machine Guarding 16
1910.217 – Mechanical Power Presses 16
(10)
1910.1200 – Hazard Communication 14
 

Top 10 Serious Violations for 2004:

Standard Total Violations
(1)
1926.451 – Scaffolding 7,696
(2)
1926.501 – Fall Protection 4,961
(3)
1910.1200 – Hazard Communication 3,707
(4)
1910.147 – Lockout/Tagout 3,379
(5)
1910.212 – Machine Guarding 2,889
(6)
1910.305 – Electrical Wiring 2,476
(7)
1910.134 – Respiratory Protection 2,382
(8)
1910.178 – Powered Industrial Trucks 2,171
(9)
1910.219 – Mechanical Power Transmission Apparatus 2,138
(10)
1926.1053 – Ladders 1,804


Source: The Occupational Safety and Health Administration

If you have any questions concerning this or other OSHA citation issues, please contact W. Jon Wallace at 919.933.5548 or .


Home | Hearing Conservation | Occupational Health | Industrial Hygiene | Indoor Air Quality | Safety | Training | Software | Equipment
Article Archive | Contact Us | Privacy Policy

© 2009, Workplace Group

All rights reserved. No part of this Web site may be copied or otherwise reproduced without
express written permission from Workplace Group.

Contact us at:

Workplace Group
420-B Gallimore Dairy Road
Greensboro, North Carolina 27409
888-974-0001
336-931-0300
FAX: 336-931-0018

To report problems with this web site, please e-mail the .