|
Standard
|
Total Violations
|
Top Five Subparagraphs cited and (# of citations)
|
| 1. Scaffolding, 1926.451 |
7,953 |
(g)(1): Fall Protection >10’ (1,270)
(e)(1): Scaffold platform access (1,051)
(b)(1): Scaffold platform construction (959)
(g)(1)(vii): Fall protection for scaffolds not otherwise specified (562)
(c)(2): Firm foundation (base plates and mud sills) for scaffolds (531)
|
| 2. Hazard Communication, 1910.1200 |
6,702 |
(e)(1): Written hazard communication program (1,973)
(h)(1): Employee information and training – specific (859)
(h): Employee information and Training – General (750)
(g)(1): Material Safety Data Sheets – chemical manufacturer (660)
(f)(5): Container labeling (599)
|
| 3. Fall Protection, 1926.501 |
5,118 |
(b)(1): Fall protection >6’ (2,001)
(b)(13): Fall protection during residential house construction (964)
(b)(10): Protection on low sloping roofs (595)
(b)(11): Protection on steep roofs (305)
(b)(14): Protection of wall openings (251)
|
| 4. Respiratory Protection, 1910.134 |
4,075 |
(c)(1): Written respiratory program (626)
(e)(1): Medical evaluation of employee’s ability to use respirator (614)
(c)(2)(i): Medical evaluation procedure (339)
(f)(2): Respirator fit testing (301)
(k)(1): Demonstrate knowledge of respirator use (206)
|
| 5. Lockout/Tagout, 1910.147 |
3,796 |
(c)(1): Written energy control program (718)
(c)(4)(i): Equipment-specific lockout procedures > 2 energy sources (670)
(c)(7)(i): Training of Authorized, Affected, and Other employees (545)
(c)(6)(i): Annual periodic inspection of program (393)
(c)(4)(ii): Specific requirements of equipment-specific procedures (331)
|
| 6. Electrical Wiring Methods, 1910.305 |
3,106 |
(b)(1): Protection of openings in cabinets, boxes, and fittings (719)
(b)(2): Covers for pull boxes, junction boxes, and fittings (532)
(g)(2)(iii): Flexible cords – strain relief (424)
(g)(1)(iii): Flexible cords – prohibited uses (413)
(g)(2)(ii): Flexible cords used only in continuous lengths (142)
|
7. Machine Guarding – General Requirements,
1910.212
|
2,747 |
(a)(1): General requirements for machine guarding (1,498)
(a)(3)(ii): Point of operation guarding (835)
(b): Anchoring fixed machinery (196)
(a)(5): Guarding of fan blades (141)
(a)(2): Guards shall be affixed to machine or otherwise secured (48)
|
| 8. Forklifts, 1910.178 |
2,421 |
(l)(1)(i): Operator training – specific (371)
(l)(6): Certification of operators (307)
(p)(1): Defective trucks taken out of service (287)
(l): Operator training – general (273)
(q)(7): Inspection of powered industrial trucks (171)
|
| 9. Electrical – General Requirements, 1910.303 |
2,219 |
(g)(2)(i): Guarding of live parts >50 volts (519)
(f): Identification of disconnecting means and circuits (404)
(b)(2): Using equipment per listing/labeling (335)
(b)(1): Equipment free from recognized hazards (240)
(g)(1)(ii): Clear spaces in front of breakers not used for storage (229)
|
| 10. Mechanical power transmission apparatus, 1910.219 |
2,026 |
(d)(1): Guarding pulleys >7’ (572)
(e)(3)(i): Guarding vertical/inclined belts (315)
(f)(3): Enclose sprockets/chains (294)
(e)(1)(i): Guarding horizontal belts/ropes (244)
(c)(2)(i): Guarding horizontal shafting (176)
|
